Other Deals K-T - Getmetools.com



    © 2008 Page updated 10/7/08

    [SITE MAP]

    If you don't see something, just ask - we might be able to get it!

    Kastar 436A - Exhaust Hanger Removal Pliers: $22.58

    Quantity: Check out now

    Specially designed tool for the removal of rubber exhaust system hangers, i.e. tailpipe, exhaust pipe, and muffler. Features self-locating forcing pin, and "cushioned" slip-resistant handles at a 25 degree offset for easy access in restricted areas.

    Kastar 2577 - 8 Piece Floating Axle Housing Thread Restorer Kit: $119.60

    Quantity: Check out now

    Sizes:
    1-5/8"-16, 1-13/16"-16, 2"-16, 2"-16LH, 2-1/8"-16, 2 1/4"-16, 38-1.50mm
    • Aids in the servicing of front and rear floating axle housings on sport utility vehicles, light and medium duty trucks, and vans. Contains seven thread restorer dies and one driver socket to refurbish damaged or corroded spindle threads.
    • The special driver socket enables the technician to easily use individual thread restorers with a standard 1/2" drive ratchet wrench. The application chart provides quick thread restorer die identification per vehicle.
    • Packaged in a plastic blow molded case for protection and easy use.

    Kastar 2581 - 26 Piece Master Re-Threading Kit: $23.28

    Quantity: Check out now

    Contains:
    7 SAE Coarse Dies, sizes:
    1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11
    7 SAE Fine Dies, sizes:
    1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18
    6 SAE Coarse Taps, sizes:
    1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12
    6 SAE Fine Taps, sizes:
    9, 10, 11, 12, 13, 14, 16, 18, 20, 24, 27, 28, and 32

    Kastar 3013A - Go-No-Go Gauge Set: $8.09

    Quantity: Check out now

    Contains twenty-two "Step Ground" blades     that are ground at the tip .002" less than the normal blade thickness to permit a quick check for proper setting or clearances.

    Sizes in both SAE and Metric include:
    .004-.006 .009-.011 .014-.016 .020-.022
    .005-.007 .010-.012 .015-.017 .021-.023
    .006-.008 .011-.013 .016-.018 .022-.024
    .007-.009 .012-.014 .017-.019 .023-.025
    .008-.010 .013-.015 .018-.020 .024-.026
    .019-.021 .025-.027

    Kastar 3077 - Jacobs Engine Brake, Cummins Feeler Gauge Set: $58.77

    Quantity: Check out now

    • This set contains all the gauges required to set slave piston lash on Cummins diesel engines.
    • Nine special feeler gauge blades with blade holding tool. Blades are of the following thicknesses: .015, .018, .023, .024, .030, .037, .040, .046, and 7.00mm.
    • Feeler gauge blades are in thicknesses and configurations required by each Jacobs Engine Brake model.

    Kastar 3078 - Jacobs Engine Brake, Detroit Diesel Feeler Gauge Set: $31.29

    Quantity: Check out now

    This set contains all the gauges required to set slave piston lash on Detroit Diesel engines. Set consists of 4" offset feeler gauges with 0.002" step Go-No-Go.
    • Feeler gauge blades are in the thicknesses required by each Jacobs Engine Brake model.
    • 0.002" step is on the bottom side of the blade so that the Go-No-Go can be felt against the exhaust rocker arm adjusting screw or exhaust valve bridge (depending on the model engine).
    Blade sizes and usage:
    0.019" - 0.021" Series 60 model years 1999 and before
    0.022" - 0.024" Series 60 all model years, Series 50
    0.025" - 0.027" Series 60 all model years, Series 50
    0.031" - 0.033" Series 60 model year 2000 and after
    0.058" - 0.060" Series 71, Series 92
    0.063" - 0.065" Series 71, Series 92

    Kastar 3079 - Master Feeler Gauge Set For Heavy Duty Trucks: $46.06

    Quantity: Check out now

    This handle and blade set was designed to make valve adjustments faster and easier. The double-end plastic handle is color-coded light blue for intake and red for exhaust, with three different configurations of offset blades.
    • The technician only need select the required feeler gauge blades one time by attaching them to the handle with the finger nuts. The remainder of the feeler gauge blades can be left in the toolbox.
    • Color-coded handle makes using the correct blade fast and accurate. Even in dimly lit shops, the technician can be confident of using the correct blade without wasting time having to read the blades every time he sets them down and picks them up again.
    • The feeler gauge blades sets have a range of .008" to .030" to cover all heavy-duty truck engine applications, and come on a ring to keep them all together.

    Set contains the following handle and gauge configurations:
    Part No. 5469 - double-end plastic color-coded handle
    Part No. 3072 - 6" blade with 1" long 90ฐ offset:
    • Loose set of feeler gauge blades have a range of .008" to .030" to cover all heavy-duty truck engine applications, and come on a ring to keep them all together.
    Part No. 3074 - 3" blade with .625" long 45ฐ offset:
    • Loose set of feeler gauge blades have a range of .008" to .030" to cover all heavy-duty truck engine applications, and come on a ring to keep them all together.
    Part No. 3075 - 3" blade with 1" long 30ฐ offset and 0.5" of 0.002" step:
    • Loose set of feeler gauge blades have a range of .008" to .030" to cover all heavy-duty truck engine applications, and come on a ring to keep them all together.

    Kastar 4651 - Automatic Slack Adjuster Release Tool & Wrench: $35.29

    Quantity: Check out now

    • These tools are used for adjusting Rockwell Automatic Slack Adjusters. The set consists of a forked-end tool to release the tensioner button, and a 5/16" double square offset reversible wrench with E-Z Grip handle.
    • Insert the release tool under the button of the pull-pawl to disengage the anti-reverse mechanism on the slack adjuster. (Spring tension of the pull-pawl will hold the tool in place.) Then use the wrench to adjust the brake to drum clearance.
    • Comfortable, E-Z Grip, screwdriver-style handle allows user to apply more turning power with less pressure and fatigue to the hand.

    Kastar 5429 - 20-Pc. 5/16" Extra Long Bit Wrench Set: $58.78

    Quantity: Check out now

    • Used in conjunction with multiple bits for general purpose applications.
    • Wrench set is especially useful to remove/install automotive door hinges.
    • Extended handle allows access to restricted areas.
    • Magnetic bit retention allows easy interchangeability of bits
    • Heat-treated steel gives the wrench higher torque capabilities.
    Bits included:
    • 7-Pc. Hex Bit Set (Sizes 3, 4, 5, 6, 8, 10 and 12mm)
    • 7-Pc. TORXฎ Bit Set (Sizes T15, T20, T25, T27, T30, T40 and T45)
    • 5-Pc. Triple Square Bit Set (Sizes 5, 6, 8, 10 and 12mm)

    Kastar 5476 - 5 Piece Offset Metric E-Z Grip Wrench Set: $62.19

    Quantity: Check out now

    Those "hard-to-get-at" nuts and bolts are easy to turn with these top quality ratcheting box wrenches.
    • 25-degree angle allows the user to reach tight situations without scraping their knuckle.
    • Reverse by simply flipping the reversing lever with your finger.
    • Critical parts are heat-treated to ensure safety and durability.
    • Wrench handles are nickel-chrome plated for lasting quality and assurance.
    • Openings are accurately broached for that perfect non-slip fit.
    • Packaged in a styrene tray with clear lid.
    • Set Contains: 8, 10, 13, 14, 15mm sizes (15mm is 12 point).

    Kastar 6525 - Extra Long 5/16" Battery Terminal Wrench: $10.63

    Quantity: Check out now

    This extra length (9-3/4") allows for better accessibility in reaching side terminals on the following: Pontiac Grand AM '94 to present, GM "W" Body Cars '94 to present, Buick Regal, Olds Cutlass, Chevrolet Lumina, and Pontiac Grand Prix. Features a reversing lever and a vinyl grip to protect against electric shock.

    Kastar 679 - T-45 TORXฎ Bit - 7 Inches Long: $9.20

    Quantity: Check out now

    This tool is used to remove/install the intake manifold on Cummins N14 engines. It allows the technician to remove/install the intake manifold on Cummins N14 engines without having to remove the fuel pump and air compressor.

    Kastar 755 - 6 Piece Wheel Stud Installer Kit for Light Trucks and SUVs: $44.28

    Quantity: Check out now

    This kit assures correct installation of wheel studs the first time, every time. No more ruined studs or lug nuts, and no more wasted time. Easy instruction/diagram sheet included. This kit includes sizes 1/2"-20, 9/16"-18, 12mm-1.75, 14mm-1.50, plus the spacer and washer. These components will install wheel studs on almost all foreign and domestic light trucks and SUVs.

    Kastar FM-720A - Ford Ignition Module Wrench: $9.12

    Quantity: Check out now

    Specifically designed 25ฐ offset ratcheting dual-end wrench containing a 7/32" hex (5.5mm), and T-20 TORXฎ bit. Allows for easy removal of Ford ignition module without removal of or tampering with the distributor.

    Kastar 12025 - 25 Blade Feeler Gauge Set: $18.82

    Quantity: Check out now

    Contains twenty-five 12" x 1/2" of the following thicknesses:
    .0015 .006 .011 .016 .021
    .002 .007 .012 .017 .025
    .003 .008 .013 .018 .027
    .004 .009 .014 .019 .030
    .005 .010 .015 .020 .040

    Ken-Tool 30165 - Dual Wheel Lug Stud Remover: $52.50

    Quantity: Check out now

    • Special self-tapping splines provide maximum grip to remove stripped lug studs.
    • Use with TR1, TR98 truck wrenches.
    • Can also be used with an open end wrench.
    • Use with soft faced hammer.

    Ken-Tool 30609 - Budd Nut Wrench: $13.49

    Quantity: Check out now

    • Wrenches hold outer 1-1/2" cap nut on dual wheels while turning inner nut.
    • Lip fits in hole to secure wrench in place.

    Kent-Moore 499207300 - Subaru 2.5L Cam Sprocket Holder: $149.54

    Quantity: Check out now


    Kent-Moore 499207400-A - Subaru 2000 3.0L Cam Sprocket Holder: $137.26

    Quantity: Check out now


    Kent-Moore 499977100 - '97 Subaru Legacy Crankshaft Sprocket Wrench: $95.78

    Quantity: Check out now


    Kent-Moore 499977300A - Subaru Crankshaft Pulley Wrench: $169.54

    Quantity: Check out now


    Kent-Moore 499987500 - Subaru Legacy, SVX, Impreza Crankshaft Socket: $70.11

    Quantity: Check out now


    Kent-Moore BT-3386-FVT - Timing Belt Tension Gauge: $172.08

    Quantity: Check out now


    Kent-Moore BT-7901-B - Subaru Spark Plug Boot Puller: $19.09

    Quantity: Check out now


    Kent-Moore J-25774-A - Pinion Flange Holder Wrench: $183.62

    Quantity: Check out now


    Kent-Moore J-36660-A - Electronic Torque Angle Meter: $1278.54

    Quantity: Check out now

    This is a precision, microprocessor controlled torque / angle meter which will ensure fasteners are tightened to true clamp load specifications consistently and easily, that will exert the same clamp force without deviation from one fastener to another.

    Kent-Moore J-42908 - Cam Sprocket Holder (1999 Phase 2 Engines): $122.22

    Quantity: Check out now


    Kent-Moore J-44959 - T-70 Torx Bit: $45.47

    Quantity: Check out now


    Klann 0121-38 - Fuel Line Connector Release Pliers: $48.35

    Quantity: Check out now

    • Suitable for VW-Audi, Fiat, GM, Opel, Mercedes, Mercedes M-Class with gasoline engines.
    • For removal and replacement of the connections on the in-line fuel filter.
    • Required when replacing the fuel filter or during engine repairs.

    Klann 0190-41 - Plastic Rivet Removal Plier: $54.56

    Quantity: Check out now

    • With 90ฐ rotating head.
    • To remove 2-part re-usable plastic rivets - examples: On trim or inner door facings.
    • By lifting the central spreader pin with the pliers, the Plastic Rivet may be withdrawn.

    Klann 0242-99 - GM Air Bag Release Tool: $16.36

    Quantity: Check out now

    • This tool was designed for the safe and fast release of the retention springs securing the steering wheel airbag (SIR) module in place on many GM models.
    • Multiple angle adjustments.
    • Very affordable.
    • Vehicles include Buick, Cadillac, Chevrolet, Pontiac, some trucks and minivans.

    Klann 0270-31B - Alignment Wrench With 7 Bit Inserts: $143.14

    Quantity: Check out now

    • Suitable for Mercedes Toe Adjustment: 190 Series (W201), C-Class (W202), C-Class (W203), 200 - 300 E (W124), E-Class (W210), S-Class (W220).
    • Due to its special form, this tool allows easy and precise adjustments to the inaccessible adjustment bolts.
    • 5/16“ Drive Bit-Inserts: T30, T40, T45, T50, XZN-8, XZN-10, XZN-12

    Klann 0366-7 - Mercedes Fan Clutch Wrench: $72.55

    Quantity: Check out now

    • With 3 holes
    • Required to remove the radiator fan hub, the reaction spanner is bolted to the front face of the hub.
    • The poly-V belt is not in place and cannot be used to lock the hub.
    • Application: Mercedes C- and E-Class engines M111 (4 cylinder 4 valve), OM604, OM605 and OM606.
    • Length:.......410 mm

    Klann 0581-1 - BMW Oval Hose Clamp Socket: $19.65

    Quantity: Check out now

    • For removal, replacement or tightening the safety clamp on fuel lines.
    • For BMW hose clamps, 2 flats, oval 5.2ื6.1

    Klann 4051-3310 - VW/Audi M10 Ribe Socket: $31.06

    Quantity: Check out now

    • Ideal to remove and re-tighten cylinder-head retaining bolts on VW-Audi engines with RIBE profile.

    Klann 4064-601K - 5 Point Security Bit Set: $48.34

    Quantity: Check out now

    • 9 screwdriver inserts in plastic case.
    • For loosening and tightening the new 5 point tamper-proof bolts.

    Suitable for:
    • Pumps in pump-line-injection systems on Mercedes commercial vehicles (e.g. Atego, Actros).
    • Mercedes outside mirror.
    • Mass Air Flow Sensor VW-Audi
    • Immobiliser control unit (EWS3) on Rover 75 and MG ZT.

    Consists of:
    • 9x Bit Insert, , hex. 1/4" drive.
    • 1x Bit Holder, 1 hex.1/4"; 1/4" drive (to insert the screwdriver bits).
    • 1x Plastic case

    Klann 4306-8320 - Mercedes 5 Point Mirror Removal Tool: $36.37

    Quantity: Check out now

    • The length and narrow shape of the five-star screwdriver makes it ideal for removing and installing outside mirrors on Mercedes vehicles.

    Lock Technology 1460 - Wheel Torque Extension Set 5 Pc. 1/2" Drive 65/80/100/120/140 FT-LBS: $102.72

    Quantity: Check out now

    • Designed to be used with a 1/2" impact gun
    • Will torque wheel nuts on most foreign and domestic cars and light trucks to the correct torque, the first time and every time
    • Extensions not sockets - You can use these with any 1/2" drive impact sockets
    • Kit includes: 100 ft.-lbs., 80 ft.-lbs, 65 ft.lbs, 120 ft.-lbs and 140 ft.-lbs wheel torque extension.
    • Comes in a molded case with a handy wall chart.

    Makita 2414NB - 14" Standard Duty Cut Off Saw: $156.14

    Quantity: Check out now

    • D-shape handle for easy gripping
    • Lock-off button to prevent accidental starting
    • Spark diversion guard for operators safety
    • Guide plate adjusts 45ฐ right and left - 3 locations for various sizes of materials
    • Quick release vise for secure stock retention and fast repeated cut-offs

    Makita 6907DWE - 9.6V Cordless Impact Wrench Kit: $201.32

    Quantity: Check out now

    • Variable speed (0-2,000 RPM) for controlled driving starts
    • Angled grip design for superb balance and comfortable operation
    • 3/8" Square drive
    • Electric brake for precise control
    • Conveniently located reversing switch
    • Torque (in.-lbs.): 600
    • Net Weight (lbs. w/battery): 2.9

    Makita 9554NBX - 4-1/2" Angle Grinder: $75.65

    Quantity: Check out now

    • High power to weight ratio.
    • Labyrinth construction seals motor and bearings from contaminates.
    • Conveniently located side mounted switch.
    • Small circumference barrel grip for improved handling.
    • Spindle lock for easy wheel changes.
    • 5/8"x11 Spindle
    • 10,000 RPM - 6 AMP

    Marson 39010 - The "Big Daddy" Rivet Tool: $152.39

    Quantity: Check out now

    • Big Daddy" hand riveter w/extra long handles, 3/16", 1/4" and Spec. Klik split rivet nosepieces
    • Two piece jaws Single unit body construction
    • Sets 1/2" to 1/4" diameter rivets.

    Mayhew Tools 15000 - 150th Anniversary 14 Piece Punch & Chisel Set With Hardwood Tray: $109.88

    Quantity: Check out now

    • Comes in a specially numbered collectible hardwood tray. (only the first 1000 will be numbered). Very Collectible - a part of American industrial history
    • S-2 HS Steel - superior tensile strength, toughness and long life
    • Parabolic head - reduce mushrooming & chipping
    • Full shank heat treatment - reduces any bending in tool body
    • Professional finish - enhanced corrosion resistance and looks great!

    Mayhew Tools 28630 - Rigiflex Hose Clamp Plier With Positionable Jaws: $95.47

    Quantity: Check out now

    • Ratcheting hose clamp plier with positionable cable and jaws for reaching into difficult and tight places.
    • Positionable, flexible cable - reaches into tight places with minimal effort
    • New, soft grips - ease of use
    • Multi-stop ratcheting mechanism for greater control, reduces cable problems

    Mayhew Tools 28640 - Ratcheting Cable Operated Hose Clamp Pliers: $75.97

    Quantity: Check out now

    • New ratchet feature provides amazing control of jaws.
    • Suitable for both standard & space saver clamps from 3/4" to 2-3/32".

    Mayhew Tools 28650 - Spring Loaded Cable Hose Clamp Pliers: $74.26

    Quantity: Check out now

    • This unique hose clamp plier utilizes a flexible cable with a precision machined clamp at the end, to reach where other pliers cannot. The flexibility of the pliers enables the user to reach, remove and lock clamps into the open position. These pliers have been designed to make the job easier and more cost effective.
    • These pliers are used for removing metal or plastic self-tightening hose clamps with diameters from 11/16” to 2 ฝ” (18mm to 54mm).
    • Flexible cable with a precision machined clamp at the end to reach where other pliers cannot.
    • Locking mechanism on the pliers allows the user to set the hose clamp plier and work with both hands
    • Note: Plier has a lifetime warranty. Flexible cable, p/n 28651 ($7.72), is a consumable and is therefore not warranteed.

    Mayhew Tools 28655 - 2 Piece Hose Clamp Plier Set: $120.61

    Quantity: Check out now

    • Includes Spring Loaded Hose Clamp Plier, and new easy access Hose Clamp Plier.
    • The Easy Access Hose Clamp Plier permits the mounting and dismounting of all hose clamps with diameters from 3/4" to 2-1/16".
    • This plier is the quickest tool available, where hose clamps are directly accessible to the operator.
    • The jaws of the new Easy Access Hose Clamp Pliers have a hooking capability of 360 degrees and a single gripper jaw helps prevent the hose clamp from releasing from the tool and causing injury to the end-user.

    Mayhew Tools 29895 - Stud Extractor: $53.90

    Quantity: Check out now

    • Fits a 3/8" impact wrench.
    • Will remove: Threaded, stripped, rusted, broken and smooth studs.
    • Fits studs from 1/4" to 1/2" (6-12mm).

    Mayhew Tools 45044 - Lighted Magnetic Pickup Tool: $15.92

    Quantity: Check out now

    • 3 LED Flashlight with magnetic end has 5 lbs. of pulling power.
    • Extends from 7 1/2" to 22 3/8" for long reach.

    Mayhew Tools 45650 - CatsPaw™ Hose Clamp Pliers: $38.19

    Quantity: Check out now

    • Solid, one piece construction.
    • Handles standard and space saver clamps up to 2-3/32”.
    • Locking device for control and comfort.
    • Made in France.

    Mayhew Tools 60000 - 4 Piece Dominator Hook & Pick Set: $33.88

    Quantity: Check out now

    • Patented composite ergonomically designed handle provides maximum comfort and secure grip.
    • Capped end in direct contact with the shaft allows the user to strike the tool without handle damage.
    • Blade extends throughout the handle.
    • Hardened and tempered the entire length for maximum durability.
    • Set contains 10" Scratch Awl, 10" 90 Degree Hook, 10" Complex Hook, 10" Curved Hook.

    Mayhew Tools 60001 - 4 Piece Dominator Scraper Set: $33.88

    Quantity: Check out now

    • Patented composite ergonomically designed handle provides maximum comfort and secure grip.
    • Capped end in direct contact with the shaft allows the user to strike the tool without handle damage.
    • Blade extends throughout the handle.
    • Hardened and tempered the entire length for maximum durability.
    • Set contains 1/2 x 10", 3/4 x 10", 1 x 10", 1-1/2 x 10"

    Mayhew Tools 60002 - 6 Piece Professional Hook Set: $81.25

    Quantity: Check out now

    • Patented composite ergonomically designed handle provides maximum comfort and secure grip.
    • Capped end in direct contact with the shaft allows the user to strike the tool without handle damage.
    • Heat treated and tempered s for superior toughness and long life.
    • 3 standard length and 3 extra long blades for additional reach.
    • 6 unique shapes for pulling clips rings wires gaskets washers and other small parts.

    Mayhew Tools 61044 - 14 Piece Punch & Chisel Set: $55.69

    Quantity: Check out now

    Includes:
    • Cold chisel cutting widths 1/4", 3/8", 1/2", 5/8", 3/4" 3/8"
    • Center punch
    • Starter punch point sizes 1/8" & 3/16"
    • Pin punch sizes 3/32", 1/8", 5/32", 3/16", 1/4"
    • Line-up punch point size 1/8"

    Mayhew Tools 61355 - 3 Piece Dominator Screwdriver Pry Bar Set: $50.60

    Quantity: Check out now

    • Feature patented capped end handle.
    • Two composite handle is ergonomically designed for a comfortable and secure grip.
    • Hardened and tempered the entire length for maximum durability.
    • Full manufacturers warranty.
    • Contains 7", 12", 18" blades.

    Mityvac MV5535 - Digital Diesel Compression Tester Kit: $208.63

    Quantity: Check out now

    • Stores maximum compression value for up to 12 cylinders
    • Backlit LC display is easy to read from any angle and in any light
    • Uses standard 9V battery for convenience and cost
    • Automatically shuts off after 3 minutes of non-use (memory is retained)
    • Rubber boot protects the gauge from bumps and drops
    • Sealed, grease- and oil-resistant gauge face prevents contamination of electronics
    • Displays values in PSI, Bar and kPa

    Includes:
    • Digital compression tester comprising of test gauge with rubber boot, 15" (380 mm) long, high-pressure hose, quick-change coupler
    • Injector Adapter Dodge 24V 5.9L Cummins (1999-2003), 5.9L Cummins ISB and ISBE
    • Injector Adapter Case/Cummins Series “B” 2.9L, 3.9L, 5.9L through 1998
    • Glow Plug Adapter GM 4.3L, 5.7L (1978-1985), Navistar 6.9L, 7.3L through 1994
    • Glow Plug Adapter GM 6.2L, 6.5L V8
    • Glow Plug Adapter Ford/Navistar 7.3L Power Stroke (1994-2003)
    • Glow Plug Adapter Volkswagen 1.9L TDI
    • Right-angle Adapter
    • Field service kit
    • Custom-molded case
    • User manual (English/French/Spanish/German)

    National Electric 64305SE - Dualite LED Stick Light Promo with 12 Volt Charger and Knife (While supplies last!): $35.15

    Quantity: Check out now

    • Two (2) lights in one: Flood light / Flashlight 35 LED's with independant flashlight feature.
    • Fully rechargable.
    • Every dualite comes with an integrated side hook on the flashlight head.
    • Heavy-duty rubberized handle with anti-roll feature Lasts up to seven (7) hours or ten (10) on flashlight alone.
    • Comes with charging indicator to insure proper charge.
    • Includes Knife and 12 Volt Charger Adaptor.

    Quick Stick W3000 - Hood Release Tool Hoodini Alternative: $38.29

    Quantity: Check out now

    • Open Hood and Align Parts From Same Location
    • Easy to Install Between Existing Cable and Lock Assembly
    • Makes Aligning Hoods and Fenders Easy
    • Eliminates the Need for a Second Technician decreasing your labor costs

    Safety Seal SSKAP - Auto and Light Truck Deluxe Tire Repair Kit: $41.36

    Quantity: Check out now

    Each kit contains:
    • 60 - 4 inch (10cm) repairs
    • Metal T-Handle Insertion Tool
    • Extra Insertion Needle, wrench & set screw
    • Metal T-Handle Spiral Probe
    • Lube
    • Instructions
    • Durable Impact Resistant Carrying Case

    SAS 6501 - Small Value-Touch 5 Mil Latex Gloves - Box of 100: $5.04

    Quantity: Check out now

    • Natural rubber, ambidextrous
    • For convenient protection when mixing or applying paint
    • Excellent for medical, pharmaceutical and laboratory use, as well as food processing and packaging

    Other Sizes Available:

    SAS 6502 - Medium Value-Touch 5 Mil Latex Gloves - Box of 100: $5.04

    Quantity: Check out now

    SAS 6503 - Large Value-Touch 5 Mil Latex Gloves - Box of 100: $5.04

    Quantity: Check out now

    SAS 6504 - X-Large Value-Touch 5 Mil Latex Gloves - Box of 100: $5.04

    Quantity: Check out now

    SAS 650-1002 - Medium Dyna-Grip 8 Mil Latex Gloves - Box of 100: $9.51

    Quantity: Check out now

    • Powder-Free Latex
    • 8 Mil.
    • Exam Grade
    • Textured Surface for Gripping Power
    • Easy Slip-On Comfort
    • Protein Rated
    • Beaded Cuff
    • 100 Gloves by Weight per Box

    Other Sizes Available:

    SAS 650-1003 - Large Dyna-Grip 8 Mil Latex Gloves - Box of 100: $9.51

    Quantity: Check out now

    SAS 650-1004 - X-Large Dyna-Grip 8 Mil Latex Gloves - Box of 100: $9.51

    Quantity: Check out now

    SAS 650-1005 - XX-Large Dyna-Grip 8 Mil Latex Gloves - Box of 100: $9.51

    Quantity: Check out now

    SAS 6602 - Medium Thickster 14 Mil Latex Gloves - Box of 50: $9.51

    Quantity: Check out now

    • Disposable
    • 50 gloves per box
    • Heavy Duty
    • 14 Mil thickness
    • Maximum Strength
    • Tear resistant
    • Textured grip
    • Latex Construction
    • Perfect for automotive technicians, painters,furniture refinishing,janitorial, agricultural

    Other Sizes Available:

    SAS 6603 - Large Thickster 14 Mil Latex Gloves - Box of 50: $9.51

    Quantity: Check out now

    SAS 6604 - X-Large Thickster 14 Mil Latex Gloves - Box of 50: $9.51

    Quantity: Check out now

    SAS 6605 - XX-Large Thickster 14 Mil Latex Gloves - Box of 50: $9.51

    Quantity: Check out now

    SK Tools SK 89103 3pc. Flexible Pliers Set: $54.90

    Quantity: Check out now

    • Unique patented design for access in difficult to reach areas.
    • Spring loaded for ease of use in repetitive applications.
    • 180 Degrees flexible handles provide easy operation at any angle.
    • Durable cutting edges precision machined and hardened for extended service life.
    • Slip resistant handles for user comfort and safety.
    Set Contents:
    • 7" Flexible Linesman Combination Pliers, 6.5" Flexible Diagonal Cutter Pliers, 7" Flexible Needle Nose Pliers. Packaged in a tray.

    Sir Tools 2705 - Cam Holder & Pulley Counter Holder: $52.53

    Quantity: Check out now

    • Universal tool for securing cam sprocket from rotating during R&R of cam nut on OHC engines.
    • Comes complete as shown with (3) pairs of different size lock pins.
    • Lock pins slide in a milled slot which are secured in place with an Allen bolt from behind.
    • This allows for applicability to a wide range of sprocket sizes.

    Sir Tools 9000A - Removal Radio Tool Kit: $18.69

    Quantity: Check out now

    • The “A” Kit is a wallet type holder with six (6) slots storing a grand total of twelve (12) keys
    • 2 pc. “U” hooks = Ford, LandRover,Saab: DIN Chassis radio mounts
    • 1 pc. five (5) sided “Pentagon” driver = Most every BMW model excluding E38 & E39
    • 4 pc. slotted keys = New Audi & VW
    • 2 pc. Special slotted keys = Mercedes & Porsche 996, Boxster: all new Becker Radio models
    • 2 pc. special cross shaped keys = Older VW models
    • 1 pc. Allen key = New BMW E38 & E39
    • Updated application key kit for Mercedes removes “Becker” radios of all Porsche 996 and Boxster
    • Updated key combo for all Audi and VW radios with (four horizonatal slots) 2000 & newer or (two vertical slots) pre-2000
    • Weight of the kit is 3.3oz (ounces)

    Sir Tools HO70 - Honda/Acura Counter Holder Kit: $97.92

    Quantity: Check out now

    Features and Benefits:
    • A must for the professional Honda mechanic!
    • Special bonus kit assembled consists of part #'s HO50 and HO60, which share the same 2.5 foot long securing bar.
    • Needed to properly counter the rotation of the crank shaft pulley/harmonic balancer during R and R of crank bolt.

    HO50 - Honda / Acura Counter Holder:
    • Break loose the crank shaft pulley / harmonic balancer bolt.
    • Designed to properly secure the pulley from rotating during R and R of crank bolt.
    • The 50mm hex head armature slips past the tightest of spaces and slides right into the center slot on the pulley. Then slide the 2.5 foot long securing bar onto the receiving end of the armature and lock it into position with the securing bolt.
    • Applicable: Honda / Acura engine - 4 and 6 cylinder, '90+

    HO60 - Civic Counter Holder:
    • Break loose the crank shaft pulley / harmonic balancer bolt.
    • Designed to properly counter the rotation of the crank shaft pulley / harmonic balancer during R and R of crank bolt.
    • The specially designed head armature slips past the tightest of spaces and slides right into the center slot on the pulley. Then slide the 2.5 foot long securing bar onto the receiving end of the armature and lock it into position with the securing bolt
    • Applicable: Model - Civic, '84+

    Sir Tools ST9009 - Uni-Drive Mini 23-in-1 Kit: $19.68

    Quantity: Check out now
    • This double ended 23pc in One "Mini-Uni-Driver" kit was developed in order to aid the technician with R&R of small screws of dashboards, radios, ECU's, Instrument Panels, Cell Phones, Pocket Knives, etc. The quick interchange of each of the 11 Double-Ended driver bits is easily accomplished with the quick brass securing chuck. The back bone of this special kit is the high quality handle which is open-ended allowing for furture bits as the need arises for a greater range. Each double ended bit is easily adjusted when secured in the handle and all tips are coated with Mag./Phos. process to protect against corrosion. All pieces of this kit are neatly stored in a storage case with a clear plastic cover for easy identification.
    • 11 ~ Double ended Bits
    • 1 ~ Quick Chuck Handle
    • T5 x T6
    • T7 x T8
    • T9 x T10
    • T15 x T20
    • PH 00 x FL2.0mm
    • PH 0 x FL3.0mm
    • PH 1 x FL4.0mm
    • HEX 1.5mm x 2.0mm
    • HEX 2.5mm x 3.0mm
    • HEX 1/8” x5/32”
    • HEX 5/64” x 3/32”

    Stant 12270 - Cooling System Pressure Tester: $77.44

    Quantity: Check out now

    • The Stant 12270 tester allows you to test today's cars higher pressure cooling systems and pressure caps up to 30 pounds. The gauge includes new cap testing pressure ranges of 17-19 lbs., 20 lbs., and 28-30 lbs. The larger color coded dial makes it easy to accurately test these higher pressure caps and systems.
    • The 12270 head also includes a pressure release bar that, when turned clockwise, releases pressure buildup before removing the head from the neck.
    • The 12270 pressure tester comes in its own plastic carrying case with:
    (1) 12559 spacer to drop in 1" deep filler necks for testing, (1) 12552 cap adaptor to check standard "A" size caps, and a complete easy to use instruction manual

    Stant 12270 Tester Adapters

    PART #
    DESCRIPTION
    APPLICATION
    PRICE
    12015
    		2-1/2" Threaded Adapter White & GMC Truck
    $25.12

    Quantity: Check out now
    12016
    		M48x3 Threaded Adapter
    Requires 12017     		Late model Audi, Porsche & Volkswagen
    $25.13

    Quantity: Check out now
    12017
    		M48x3 Threaded Bushing
    Used with 12016     		Late model Audi, Porsche & Volkswagen
    $5.82

    Quantity: Check out now
    12018
    		M43.2x3 Threaded adapter Volvo, Saab and many late model Renault
    $31.91

    Quantity: Check out now
    12021
    		Small diameter, 45mm
    cap adapter     		Honda, Mitsubishi, Nissan, Subaru, Toyota
    $12.54

    Quantity: Check out now
    12023
    		M52x3 Threaded Adapter Late model Jaguar & Pontiac LeMans
    $56.22

    Quantity: Check out now
    12024
    		Small diameter, 44mm
    cap adapter     		Toyota & Lexus
    $12.88

    Quantity: Check out now
    12025
    		Small diameter, 31mm
    neck adapter     		Acura, Geo, Honda, Isuzu, Lexus,
    Mitsubishi, Suzuki, Toyota
    $68.88

    Quantity: Check out now
    12026
    		Threaded neck adapter GM "N" body, Ford, Saturn, IH
    $39.94

    Quantity: Check out now
    12027
    		Small diameter, 32mm
    neck adapter     		Honda, Mitsubishi, Nissan, Subaru, Toyota
    $20.04

    Quantity: Check out now
    12029
    		Threaded cap adapter GM "N" body, Ford, Saturn
    $33.37

    Quantity: Check out now
    12031
    		Gasket replacement pack
    $14.47

    Quantity: Check out now
    12450
    		2-11/16" Truck adapter kit
    $28.72

    Quantity: Check out now
    12451
    		Rubber plug
    $2.18

    Quantity: Check out now
    12452
    		Rubber gasket
    $0.85

    Quantity: Check out now
    12453
    		Large diameter neck adapter GM "X" cars
    $15.59

    Quantity: Check out now
    12552
    		3/4" Deep cap adapter
    $10.76

    Quantity: Check out now

    Steck 21825 - Bushing Tool: $14.49

    Quantity: Check out now

    • Offset design allows for easy access to all door hinges
    • Easily punch out bushings
    • Breaks fewer bushings
    • Super tough alloy steel
    • Also helps to align bushings when reinstalling

    Storm by Central 3C301 - Digital Caliper - 0-6 (0-150mm): $18.39

    Quantity: Check out now

    • Range: 0-6"/0-150mm
    • Graduations: .0005"/.01mm
    • Easy to read digital display with direct inch/metric conversion
    • Capable of 4 measurements - inside, outside, depth and step

    Thexton 334 - Spark Plug Wire Puller: $14.03

    Quantity: Check out now

    • Firmly grips frozen boots, removes wth a twist and a pull
    • Eliminates wire separation
    • Front tabs grip under boot, jaws secure sides
    • Compact to fit tight places
    • All steel with vinyl grips

    Tif 5750A - Super Scanner Refrigerant Leak Detector: $284.54

    Quantity: Check out now

    • LED leak size indicators
    • Two sensitivity positions, including our unique ScanMode
    • Reset button for instant re-calibration
    • Detachable probe
    • High efficiency pump
    • Detects ALL halogenated refrigerants

    Tif 7000 - Digital Thermometer/Pyrometer: $214.72

    Quantity: Check out now

    • Field calibratable, interchangeable probes.
    • Custom fitted ABS carrying case.
    • Auto Zero each reading with display; updates 3 times per second.
    • Wide sensing range.
    • Universal connector.

    Tif 7201 - Pocket IR Thermometer: $28.04

    Quantity: Check out now

    • System-on-a-Chip (SoC) technology: compact and lightweight
    • Backlit LCD display w/dual readings
    • ฐC / ฐF Switch and MAX function
    • Auto power off after 15 seconds
    • Battery level indication
    • Distance to spot (D/S): 1:1
    Applications:
    • Automotive
    • Electrical
    • General home use
    • HVAC/R

    Tracer Products TP9350 - COBRA™ Fiber Optic Scope - UV Leak Detection and White LED Borescope : $306.60

    Quantity: Check out now

    • UV LED for fluorescent leak detection and detecting surface flaws plus bright white LED for component inspection
    • Super-advanced fiber optic imaging bundle provides unsurpassed resolution with infinite focal point
    • 24" flexible, “No-Droop” shaft maintains its position in tight quarters 10mm shaft diameter
    • Resolution of 7,400 pixels
    • Fluorescence-enhancing glasses for use with UV light and fluorescent leak detection dyes (dyes sold separately)
    • Clip-on inspection mirror for viewing at an angle (mirror for external inspection only)
    • Powered by 4 “AA” batteries
    • Rugged carrying case with foam insert



    © 2008 Page updated 10/7/08

    [SITE MAP]