• Ideal for automotive, plumbing/HVAC, audio/video electronics, and home repair applications.
• Lighted 1-1/2" x 2-1/2" mirror makes thorough inspection possible.
• Once inserted into inspection area, simply turn on the bright light using the on/off switch, and push/pull thumb wheel to adjust mirror angle up to 90°.
• Light floods work area.
• Rigid shaft offers 18" overall reach.
• (2) AA batteries included.
• 90° adjustable mirror.
• Thumb wheel controls mirror angle.
• Light floods work area.
• 4 Power mirror (1-1/2 x 2-1/2).
• (2) AA Alkaline batteries included.
Steelman 05550 - 6-1/4" Straight Nose Gripper Hemostat: $7.00
• 3 position locking handles.
• Made of stainless steel.
Hemostat Stainless Steel Grippers Are Good For The Following Uses:
• Heat sinks for soldering
• Pull wires through tight areas
• Pick-up small objects where fingers cannot reach
• Available in 6-1/4" and 10-3/8" lengths
Other Length:
#05554 - 10-3/8": $11.00
Steelman 05560 - 6-1/4" 22° Bent Nose Gripper Hemostat: $7.00
• 3 position locking handles.
• Made of stainless steel.
Hemostat Stainless Steel Grippers Are Good For The Following Uses:
• Heat sinks for soldering
• Pull wires through tight areas
• Pick-up small objects where fingers cannot reach
• Available in 6-1/4" and 10-3/8" lengths
Other Length:
#05564 - 10-3/8": $11.00
Steelman 05604 - 6" Slide Locking Tweezers: $5.00
All Stainless Steel construction.
Steelman 05606 - 6-3/4" Curved Head Utility Tweezers: $5.00
• Listen to 6 under chassis locations in one road test
• Hear noises that cannot be duplicated without road testing vehicle
• Essential for saving needless warranty expense
• Save time and labor expense finding those hard to find noises
• This electronic diagnostic system will conquer the most frustrating and costly problems, finding problem sounds while driving the vehicle.
• Comes with ABS carrying/storage case
• An essential tool for all auto mechanics/bodyshops and new car dealers
• Includes all of the great features listed for the ChassisEAR model number 06600
• Includes all of the features listed for the EngineEAR model number 65001
• Two great products in one convenient set
Steelman 06800 - EngineEAR II: $114.00
• Ultra sensitive microphone and amplifier give full range of sounds needed by the professional.
• Quickly pinpoints noise and location of bad bearings, bushings, dirty fuel injectors, wind & air leaks, noisy valves & lifters.
• Non-conductive coating will not bother expensive computer circuitry.
• Limited distortion of unwanted sounds.
• 7-sound level control settings, 60db to 120 db, adds clarity to all types of noises.
• db meter, monitor
• Flexible shaft reaches tight areas.
• High-low volume control.
• Battery check position on control switch.
• Includes ABS carrying/storage case.
SAVE TIME TROUBLE-SHOOTING
EngineEAR II is an advanced electronic stethoscope which dramatically outperforms and replaces the ordinary mechanic's stethoscope, and offers much more versatility to automotive, industrial and HVAC service technicians.
This time saving product is used to detect bad bearings, bushings, noisy lifters, exhaust manifold leaks, broken or chipped gear teeth. It is also used to pinpoint the location of wind and water leaks around doors, windows, and sunroofs.
Simply place the sensing tip on the suspect part, place the professional headphones over both ears (blocks surrounding noise), turn on unit, adjust the volume control, db sound level and listen to what's going on.
A new level of problem solving... The EngineEAR II with the 7-sound levels enables the operator to select the correct frequency from 60dB to 1200dB, thus adding clarity to all types of noises.
The new inductive Metal Probe quickly fits over the EngineEAR II microphone and is perfect when you need a longer reach, or are working around very hot surfaces. It senses the faintest vibrations and transmits very clear sounds to the headphones through our extraordinary amplifier.
4 Piece Mini LongREACH Pliers Set containing:
Long Bent Nose
Diagonal
Flat Nose (Duckbill)
Long Nose with Cutter
• Drop Forged Carbon Steel C-45
• Jaw Hardness HRC 50-55 (Rockwell) by Electrical Induction
• Natural Machine Finish
• Red PVC Coarsened Dipped Handles
• Black Zippered Carry Case
• Patent Pending
Steelman 301763 - 8" Diagonal Cutter With Crimp, Strip: $14.00
3 Piece 11" LongREACH Gripper Pliers Set containing:
Small: 5/16" x 11"
Medium: 1/2" x 11"
Large: 3/4" x 11"
• Uses include: Hoses, PCV, Tubing, Lifters.
• Drop Forged Carbon Steel C-45
• Jaw Hardness HRC 50-55 (Rockwell) by Electrical Induction
• Natural Machine Finish with Special Coating to prevent Rust
• Red PVC Coarsened Dipped Handles
• Black Zippered Carry Case
• Patent Pending
Steelman 50041 - Self Storing Recoil Hose: $46.00
• QUALITY AIR HOSES FOR THE PROFESSIONAL (3/8"(ID) x 25')
• Polyurethane Swivel Non-Kinking hoses
• Highly Kink-resistant, virtually undamaged by twisting or crushing
• Hoses have a compression swivel & reusable fitting on each end
• Excellent abrasion resistance, six to ten times better than rubber or nylon
• 25% lighter than rubber
• 8" supply end pig tail and 16" pig tail working end eliminates need for additional whip hose
• Made in U.S.A.
• A Backshop hose that carries a one year limited manufacturers warranty
Steelman 65001 - EngineEAR: $88.00
EngineEAR, Electronic Stethoscope containing:
Professional Headphones
Electronic Stethoscope with Flexible Shaft
Inductive Metal Probe
ABS carry/storage case with foam.
FEATURES:
Super Sensitive Microphone in tip of Stethoscope
Flexible 9" Shaft for hard to reach places.
Non-conductive coated shaft
Adjustable volume control which helps in identifying noises
Professional headphones block outside noise
Easy to use
Simply place the sensing tip on the suspect part, place the professional headphones over both ears, turn on unit, adjust the volume control and listen to whats going on.
Steelman 77030 - Memory Saver Power Station: $82.00
This unit will preserve the memory chip and other on board memory components such as digital clocks, radios, seats, mirrors, comfort settings, etc.
For use when changing out the vehicle battery
Colored lights indicate power source and charging status
Fuse protects against installation shorts or surges, prevents voltage spikes to memory chips.
Lightweight and portable
2.3 AMP, 12 Volt, lead acid, rechargeable battery, eliminates the need to purchase or have batteries available.
Comes complete with:
MemorySAVER power station unit
12V AC/DC charging unit
12V cigarette lighter socket & cord
Rechargeable 12V battery
Strap for MemorySAVER power station
ABS case for carrying/storage
All components are replaceable
• Complete service kit in one package
• Covers most vehicles on the road - domestic and foreign
• Includes 10 assorted service kits plus valve core stems and caps
• Color coded for easy identification and selection
Kit Includes: (Also available separately)
96201 Transmitter Service Kit (Schrader Sensor - Chrysler)
96202 Transmitter Service Kit (Schrader Sensor - Ford)
96203 Transmitter Service Kit (Schrader Sensor - General Motors)
96204 Transmitter Service Kit (Schrader Sensor - General Motors)
96205 Transmitter Service Kit (Schrader Sensor - General Motors)
96206 Transmitter Service Kit (Schrader Sensor - Ford)
96207 Transmitter Service Kit (Beru Sensor - European)
96208 Transmitter Service Kit (Siemens Sensor - Chrysler)
96209 Transmitter Service Kit (Pacific Sensor - Lexus,Toyota)
96210 Transmitter Service Kit (TRW Sensor - Acura, Honda)
96211 Valve Core Stems
96212 Valve Core Caps
You will also receive a free valve core torque tool!
